Purified Water Distribution System

Product Details:

The designing of the Purified Water Distribution System requires detailed engineering towards achieving a sterile environment.

FEATURES:

• Frequency controlled and sanitary distribution pump

• Optional dual pump station

• High efficiency UV disinfection / ozone reduction

• Temperature controllers

• Temperature compensated conductivity measurement

• Flow management through a vortex flow meter.

• Ozonation

• On-line TOC measurement

• Optional thermal sanitization at > 800C

• Sterile sampling valves.

Request
Callback

Additional Information:

• Item Code: GTMT05
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Each plant for the production of purified water is custom made, whether its capacity is 100 l/h or over 25 m3 /h. Every plant is designed with the customer and all the design parameters in minute details and with the same passion and dedication towards building an effective, safe and reliable system.
After all each customer has a different system requirement: An SME engaging in contact manufacture has need which differs from an international conglomerate. Thus no plant is entirely like any other. ALL Purified Water Generation Systems meet EP, USP Purified Water Generation Systems guidelines and ensure the production process, product quality and profitability. The GMP-compliant confirms to FDA and ISPE requirements.
All Purified Water Generation Systems are pre-tested, validated, compact and ready-to-use. The compact, package unit design on a stainless steel skid, are specifically adapted to the high TDS water and offers all purification technologies, which, such as:

• Automatic Sand and Activated carbon filters
• Duplex softening units, serially connected and quality-controlled with optional hot water sanitization.
• Demineralization systems
• Ultrafiltration units with 6000 Daltons cutoff
• Hot water sanitisable electrodeionisation units.
• UV Disinfectant
• Single or two-pass reverse osmosis
• Membrane degassing for CO2 reduction
• ORBITAL welded SS316L tubes
• State-of –the-art PLC technology.
• 21 CFR part 11 compliant control panels.

Request
Callback

Additional Information:

• Item Code: GTMT3
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Electrodeionisation unit employs EDI technology to produce high purity water. RO EDI process systems replace conventional Dl mixed bed resins unit to produce deionised water. INDU IONPURE INDIA's RO-EDI System does not require shutdowns to regenerate the resins with chemicals or replacing resins. Consistent high purity Ultrapure water having resistivity of 12-15 Mohm .cm can be produced.
Reverse Osmosis followed by electrodeionisation (RO EDI) and then by ultrafiltration or another stage of RO complies with USP requirement meeting the specifications for the final Rinse of primary conditioning and for non-sterile production of ointments, Liquid and Tablets. Complete unit is mounted on a single stainless steel skid. Hot water sanitizable models that shorten the time necessary for sanitization of the RO and EDI unit and Eliminates need of messy chemicals. RO-EDI System is the safest and most reliable chemical free process to produce Purified Water and is well proven.
Hot water sanitization is a perfect solution to prevent microorganism growth and biofilm development without utilizing unacceptable biocide chemical. Two pass RO system with intermediate EDI or RO-EDI with final stage of UF are also an option.
Ultra Filtration (UF) is used for final rinse to remove pyrogens (bacterial endotoxins) from water. The UF membrane has a mol. wt. Cutoff on 10000 Dalton. Pure water permeates the membranes but partical, pyrogens, colloids, silica, bacteria and high Mol, weight organics are rejected.
System produce water of considerably better quality than current requirements of USP with conductivity less than 1 µs/cm, and TOC typically less than 500 ppb. Microbial contamination is less than 100cfu/ml.
Standard capacities are available of 250 litre/hr. to 5000 litre/hr. with custom units available as per client’s requirement.

Request
Callback

Additional Information:

• Item Code: GTMT001
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ICD
• Delivery Time: 3 WEEK

Product Details:

WFI Distribution Loop System have the following special features :

• Material of construction - SS 316L.
• Internals electro polished to Ra < 0.4.
• Externals Mechanically polished to 180 grit finish.
• Welding technique - Automatic Orbital Welding.
• All interconnections through triclovers.
• All valves are of self draining type.
• All gaskets are of Teflon.
• Dead leg not more than 6d for d < 30mm.
• Dead leg not more than 3d for d >/=30mm.
• Entire installation will be completely drainable.
• Slope of the low point must be 1: 100 minimum.

Following accessories are supplied as a part of the WFI Distribution Loop System:

• WFI circulation pump.
• Mascon diaphragm valves.
• Temperature Indicator cum Controller.
• Flow Indicator cum Totalizer.
• Conductivity Indicator cum Controller.
• Sanitary Diverting Valve.
• Back Pressure Valve.
• Panel board with Data Logger, printer and alarm system

Request
Callback

Additional Information:

• Item Code: GTMT02
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

We are manufacturer of Water Generation system for Pharma. Water is heart of Industries and our Goal is to Give Best Quality water for Pharma. We manufacture as per client requirement.

Request
Callback

Product Details:

We are Leading Manufacturer of Purified Water & WFI Storage Tank.

After the purification of PW or HPW, engineering of the customer-specific storage and distribution system takes place, so product water can be delivered to each point of use in the sterile distribution system without recontamination. Here too we consider the customer’s specific conditions and produce an individually engineered design.
Following are the features of the Purified Water storage tank:

• 316L SS storage tank for PW and HPW
• Internally electropolised.
• Externally mirror / matt finish
• Jacketed hydrophobic 0.2 micron Vent Filter
• Level transmitters
• Compound Pressure gauge
• Pressure release valve
• Spray ball
• Steam trap assembly
• Inlet steam control valve

Request
Callback

Product Details:

SS Utility Pendent For Water Distribution System

The Pendent is designed to facilitate various services (WFI / DM water piping loops, electrical cabling, steam / chilled water lines, nitrogen / LPG lines, process media lines, compressed air line ) to be brought into the sterile area or working area in a close nesting manner, so as to provide easy access to services.

Design Features:

• The Pendent is designed to take mainly electrical cabling, Water, Steam and gases housed in four segments of the Pendent, isolated and independent of each other. To maintain the sterile parameter of a given area pendent enters by penetrating the false ceiling in to the area.
• Pendent is sealed on the outer edge of the bottom end entering the sterile area. The internals are sealed by means of rubber packing and silicon sealant at the top end after all services are installed. The bottom end is also sealed in a similar manner.
• This prevents cross contamination.
• Pendents housing can be dismantled easily by disconnecting utility piping and removed by opening of the clamp giving easy access to the internals.

Request
Callback

Product Details:

Empowered with our excellent infrastructural facility, our company has been able to present globally demanded PW/WFI Storage & Water Distribution System in front of our potential customers. Our offered water storage & distribution system is available in ready-to-install form. This product is applicable in water purification & treatment plant, Pharma, chemical industries. Features Hassle-free operation Occupy less space Optimum performance.

Request
Callback

Product Details:

Empowered with our excellent infrastructural facility, our company has been able to present globally demanded Purified Water Storage & Distribution System in front of our potential customers. Our offered water storage & distribution system is available in ready-to-install form. This product is applicable in water purification & treatment plant, Pharma, chemical industries. Features Hassle-free operation Occupy less space Optimum performance.

Request
Callback

Product Details:

Empowered with our excellent infrastructural facility, our company has been able to present globally demanded Purified Water Storage & Distribution System in front of our potential customers. Our offered water storage & distribution system is available in ready-to-install form. This product is applicable in water purification & treatment plant, Pharma, chemical industries. Features Hassle-free operation Occupy less space Optimum performance.

Request
Callback

Product Details:

Empowered with our excellent infrastructural facility, our company has been able to present globally demanded Purified Water Storage & Distribution System in front of our potential customers. Our offered water storage & distribution system is available in ready-to-install form. This product is applicable in water purification & treatment plant, Pharma, chemical industries. Features Hassle-free operation Occupy less space Optimum performance.

Request
Callback

Product Details:

Empowered with our excellent infrastructural facility, our company has been able to present globally demanded Purified Water Storage & Distribution System in front of our potential customers. Our offered water storage & distribution system is available in ready-to-install form. This product is applicable in water purification & treatment plant, Pharma, chemical industries. Features Hassle-free operation Occupy less space Optimum performance.

Request
Callback